Rubber Ribbed Profile Sponge Seals

Trimco ( aka Trim-Co ) manufacturers Rubber Ribbed Profile Sponge Seals. The Ribbed style Sponge Seal is made of Rubber and can be purchased with tape.

Applications Include: Cabinets, Tool Boxes For Trucks, Sunroofs, Windows, Skylights, Etc…
Click on image to enlarge

It is important to select the correct adhesive for your application. Profiles
There are two questions that must be asked to determine the right adhesive for the job:1 Will the seal be temporarily placed or permanently installed?2 What type of surface will the adhesive be bonded to? S0113Rubber Ribbed Profile Sponge Seals - S0113 S1402Rubber Ribbed Profile Sponge Seals - S1402 S0112Rubber Ribbed Profile Sponge Seals - S0112
Different surfaces require different adhesives. Your Trimco ® representative can help you determine the correct adhesive system for your application. 3M™ Heat Activated Tape System Advantages: S0114Rubber Ribbed Profile Sponge Seals - S0114 S2897Rubber Ribbed Profile Sponge Seals - S2897 S1568Rubber Ribbed Profile Sponge Seals - S1568
  • No heat required by end user, heat is applied at the factory to attach tape to extruded seal.
  • Strong bond between tape and extruded seal.
S0376Rubber Ribbed Profile Sponge Seals - S0376 S0103Rubber Ribbed Profile Sponge Seals - S0103
  • Special adhesive systems available for a variety of applications and environmental conditions.
  • Easy to apply.
  • Impervious seal between tape and extrusion protects against moisture, dust, dirt, etc.
  • No holes to drill or screws to cause cracking, corrosion and stress marks.
  • No rivets or heads to detract from product appearance.
The bonding surface where you apply the seal must be clean and free of any surface contaminants such as oils, greases, plasticizers, mold releases and dirt in general.
To achieve a good adhesive bond the seal must be compressed during installation. See Trimco ® installation guide for details.

3M Heat Activated Tape System

Seals Warranty

Trimco ® (A Division of Trim-Gard Company Limited) Seals are constantly updated, specifications are subject to change without notice and without incurring obligation. Trimco ® (A Division of Trim-Gard Company Limited) cannot anticipate or control the many different conditions which this information and our products may be used. Trimco ® (A Division of Trim-Gard Company Limited) does not guarantee the applicability, accuracy or the suitability of our Seals in any given situation. Users should conduct their own tests to determine the suitability of each product for their particular application. The Seals listed on this page are sold without warranty either expressed or implied. The buyer assumes all responsibility for loss or damage arising from the handling and use of our products.

Trimco ® uses 3M™ Heat Activated Tape on seals.
All profiles illustrated are approximately full size and are for reference only.